Elastollan® 1195A10    
    
热塑性聚氨酯弹性体（聚醚）    
    
BASF Corp. Thermoplastic Polyurethanes   
     
 Technical Data    
     

产品说明

Elastollan® 1195A10 is a polyether-based thermoplastic polyurethane (TPU). It exhibits excellent abrasion resistance, toughness, transparency, low temperature properties, hydrolytic stability and fungus resistance. Elastollan® 1195A10 is also conforming to the FDA food contact section, book 21, section 177.2600. As with all TPU products, Elastollan®1195A10 must be dried before processing. The drying step is required to both dry the granules and also maintain a low moisture content until the product enters the processing equipment. The water content must be less than 0.03% before processing. The typical drying conditions should be 2-4 hours @ 195°-220°F (90°-105°C). Elastollan® 1195A10 can be stored for up to 1 year in its original container. Containers should be stored in a cool and dry area.

总体

材料状态 • 已商用：当前有效  
资料 1 •  Technical Datasheet (English)
 
搜索 UL 黄卡 •  BASF Corp. Thermoplastic Polyurethanes

 •  Elastollan®
 
   
供货地区 • 北美洲  
性能特点 • 低温韧性 • 耐磨蚀性，良好 
 • 抗菌性 • 水解稳定 
   
用途 • 非特定食品应用  
机构评级 • FDA 21 CFR 177.2600  
外观 • 清晰/透明  
形式 • 薄膜  
加工方法 • 挤出  

 物理性能 额定值单位制 测试方法
 比重 1.14g/cm³ ASTM D792
 机械性能 额定值单位制 测试方法
 拉伸模量 51.7MPa ASTM D638
 弯曲模量 65.5MPa ASTM D790
 抗泰伯磨耗 (1000 g, H-18 转轮) 55.0mg ASTM D1044
 弹性体 额定值单位制 测试方法
 拉伸应力  ASTM D412
 100%应变 13.1MPa 
 300%应变 20.7MPa 
 抗张强度 (断裂) 35.9MPa ASTM D412
 伸长率 (断裂) 500% ASTM D412
 断裂伸长率 65% ASTM D412
 撕裂强度 3 140kN/m ASTM D624
 压缩永久变形  ASTM D395B
 23°C, 22.0 hr 30% 
 70°C, 22.0 hr 45% 
 硬度 额定值单位制 测试方法
 硬度计硬度 (邵氏 A) 95 ASTM D2240
 热性能 额定值单位制 测试方法
 维卡软化温度 127°C ASTM D1525
 补充信息  
 The value listed as Tensile Modulus ASTM D638, was tested in accordance with E-Modulus ASTM D412. 
   
 挤出 额定值单位制 
 干燥温度 90.6 到 104°C 
 干燥时间 2.0 到 4.0hr 
 建议的最大水分含量 0.030% 
 熔体温度 193 到 207°C